FNIRSI 1014D + P4100 HV Lead Set

FNIRSI Benchtop Digital Oscilloscope – 100MHz – Dual Channel – 1GSa/s + P4100 HV Lead Set

This is a combination kit comprising the P1014D Benchtop Digital Oscilloscope and the P4100 High Voltage Probe Lead Kit

The 1014D is a dual function device digital oscilloscope/function generator, with a real time sampling rate of 1GSa/s and dual channel analogue bandwidth of 100MHz. It has a 7″ LCD TFT Display, and incorporates an HV self protection circuit, which can withstand up to 400V continuous voltage, in the event that the probe is not switched over to the 10X option. A built-in DDS function signal generator provides a chopping output (2.5V p-p) supports 14 different types of standard function signal shapes which can generate a customizable waveform, in 1Hz steps. Built in memory allows for the storage of up to 1000 customized signals.

The device has the following features:

Built in DDS signal generator, supporting 12 types of signal function.
Capture output signal function, which can store up to 1000 capture signals.
Targeted high intelligent decoding algorithm, the encoder life is infinite, and intelligent anti-overload function, 1X Can withstand up to 400V withstand voltage.
With 100MHz * 2 analogue bandwidth and @ 1GSa/s sampling rate（1X = 5MHz, 10X = 100MHz).
7″ LCD TFT Colour Screen with a resolution of 800 * 480 pixels – bright colours and high contrast.
High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V.
Up to 12 parameters can be measured：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
Cursor measurement function provides simple measure the period, frequency and voltage.
Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is frozen.
Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.
Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
Equipped with a USB interface, which can be connected to a PC for transferring screenshots to allows secondary analysis of signals at a later point.
Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.
FFT display function can analyze the spectral characteristics of the signal using memory compression technology and waveform refresh eliminating flicker.
Screen brightness adjustment and background grid brightness adjustment controls.

Specifications:

Material: ABS
Analogue Bandwidth: Dual Channel 100MHz
Number of Channels: 2
Maximum Real-Time Sampling Rate: 1GSa/s
Vertical Sensitivity: 50 mV/div ~ 500 V/div
Horizontal Time Base Range: 50S/div ~ 10nS/div
Maximum Test Voltage: 40 V (1X probe), 400 V (10X probe)
Storage Depth: 240Kbit
Input Resistance: 1MΩ
ADC Precision: 8bits
Coupling Mode: AC/DC
Trigger Mode: Single, Normal, Auto
Trigger Edge: Rising Edge/Falling Edge
External Trigger Voltage: 0~40 V
Interface: USB Port
Dimensions: 340 * 140 * 70mm / 13.4 * 5.5 * 2.8in
Weight: 1500g