PDT-PEX-7205-MP-SF-I

1 Port 10/100/1000 95W PoE to 4 Port Industrial PoE+ Extender

Condition: New

£199.95 £239.94 inc VAT (UK Only)

Availability: 12 in stock (can be backordered)

EAN: 5060813341290
SKU: 0016-00003 Category:
Secure Checkout

PDT-PEX-7205-MP-SF-I

1 Port 10/100/1000 95W PoE to 4 Port Industrial PoE+ Extender

The PDT-PEX-7205-MP-SF-I is a hardened Gigabit Ethernet PoE Extender/ Unmanaged Switch which facilitates connectivity for IEEE 802.3 af/at devices, such as cameras, access points, and other PoE devices, up to a range of 100m from the device, and in locations where there is no power source available.

The device is powered from a remote power source with PoE+/++ capability (IEEE 802.3at/bt), and this can be extended, in a daisy Access Ports which are IEEE802.3af/at compatible (max total PoE load 75W) and has one 10/100/1000 RJ45 Port which receives the data and power feed from the host device.

In addition, the device can be powered via a 48~57VDC Power Supply, effectively providing a power redundancy topology.

Units can be arranged in a daisy chain configuration to extend the effective range of your network.

It is housed in a ruggedized aluminium casing, and has wide operating temperature range, making it suitable for the harshest of networking environments.

  • 5 x 10/100/1000 RJ45 Ethernet Ports
  • 4 x RJ45 PoE+ Ports – IEEE 802.3af/at
  • 2 x 100/1000 BASE-X SFP Slots with Auto-Detection
  • Powered by IEEE 802.3at or high power 95W PSE via RJ45 Port
  • Max 71W PoE Power Budget
  • Extends an additional PoE+ Network up to 100m per Device
  • Can support Daisy Chain Configuration for PoE+ up to 400m
  • DIN Rail and Wall-Mount Installation
  • IP40 Aluminium Enclosure
  • -40°C to +80°C Operating Temperature Range

The following items are included in the shipping carton:

  • 1 x PDT-PEX-7205-MP-SF-I Industrial PoE Extender
  • 1 x DIN Rail Mounting Kit (Fitted)
  • 1 x Operation & Maintenance Manual (May be electronically supplied)
  • 1 x Declaration of Conformity (May be electronically supplied)
Weight 0.474 kg
Dimensions 19 × 14 × 6 cm
RJ45

5
Form Factor

SFF
Speed

1 Gbps, 100 Mbps, 1000 Mbps
Fiber

SFP
Fiber Nos

2
PoE

Yes
PoE+

Yes
Power

Power over Ethernet
Operating Temp

-40°C ~ +80°C
Network Switch Type

Unmanaged
Condition

New
Mounting

DIN Rail
Power Supply

Not Required
Manufacturer

Parallax Digital Technologies

ETHERNET
Standards IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Forwarding and Filtering Rate 14,880pps (10Mbps)
148,800pps (100Mbps)
1,488,000pps (1000Mbps)
Packet Buffer 2Mbits
Packet Length 10KB
MAC Address Table 4K
Switch Fabric 14Gbps non-blocking
Exchange Property Backplane Bandwidth 14Gbps
Packet Forwarding Rate 14.88Mbps
INTERFACE
Power & Data 1 x RJ45 Power & Data Input (IEEE 802.3at/bt)

4 x RJ45 Power & Data Output (IEEE 802.3af/at)

2 x SFP Slot
Transmission Distance 100m
POE
Standard IEEE 802.3af/ IEEE 802.3at/ IEEE 802.3bt
Port RJ45
Pin Assignment 4/5 (+) 7/8 (-)
Power Budget Up to 71W total
Max 30W on one channel
ENVIRONMENTAL
Operating Temperature -40°C to +80°C
Storage Temperature -40°C to +85°C
Relative Humidity 5% – 95% non-condensing
MTBF 200,000 hours
ELECTRICAL
PoE Powered +48~57VDC via PoE (IEEE 802.3bt)
Optional DC Powered +48~57VDC via Terminal Block
Power Redundancy Highest Input Primary
Power Consumption 5w without PoE Devices Attached
Short-Circuit Protection Auto-Reset
Reverse Polarity Protected
MECHANICAL
Dimensions 95mm x 88mm x 46mm
Weight 300g
Casing Aluminium
Mounting DIN Rail
INDICATORS
PWR Power Status
L/A Link Activity
PoE PoE Power Output Status
FX1/2 Fiber Status
FIBER CABLES
1000 BASE-SX 50/125um or 62.5/125um – 220/55/2000m
1000 BASE-LX 9/125um SM 2-120km SFP Modules
100 BASE-FX 50/125um or 62.5/125um MM up to 2km SFP
9/125um SM 20-120km SFP Modules
CERTIFICATION
Electrical Safety EN 62368-1:2020+A11:2020
Emissions EN 55032:2015+A1:2020
Radiated Immunity EN 55035:2017+A1:2020
Harmonic Emissions EN 61000-3-2:2014
Fluctuations and Flicker EN 61000-3-3:2013
Electro-Static Discharge EN 61000-4-2:2009
Electromagnetic Field Immunity EN 61000-4-3:2010
Electrical Fast-Transients EN 61000-4-4:2012
Surge EN 61000-4-5:2014+A1:2017
Conducted Immunity EN 61000-4-6:2014
Power Frequency Magnetic Field EN 61000-4-8:2010
RoHS IEC 63000:2018
Datasheet
User Manual
Declaration of Conformity

Reviews

There are no reviews yet.

Be the first to review “PDT-PEX-7205-MP-SF-I”

Your email address will not be published. Required fields are marked *

Related

  • PDT-SPL-1202-100-J

    10/100 PoE Splitter – +12VDC 2A – DC Jack 2.1/5.5mm

    £10.45 £12.54 inc VAT (UK Only) Commercial PoE Splitters

  • PDT-SFP-02-10G-1310-1000

    10Gbps 10G-LR Cisco Compatible 10 Gigabit SFP+ 10GBASE-LR SFP Transceiver – SMF – 1310nm LC 10km

    £19.95 £23.94 inc VAT (UK Only) Commercial SFP Modules

  • Meanwell EDR-120-48

    DIN Rail PSU – 90~264VAC – +48VDC – 120W – 2.5A – Class A

    £41.95 £50.34 inc VAT (UK Only) DIN Rail Power Supplies

  • Meanwell NDR-75-24

    DIN Rail PSU – 90~264VAC – +24VDC – 75W – 3.2A – Class B

    £41.95 £50.34 inc VAT (UK Only) DIN Rail Power Supplies

  • PDT-NSU-7105-MP-SF-I

    4 Port 100/1000 BASE-T Max PoE + 1 Port 1000 BASE-T + 1 Port 100/1000 BASE-X SFP Unmanaged SFF Industrial Switch 12-48VDC

    £174.95 £209.94 inc VAT (UK Only) Industrial Unmanaged PoE Switches

  • Cisco SF350-08-K9-EU

    8 Port 10/100 Layer 3 Managed Switch

    £69.95 £83.94 inc VAT (UK Only) Commercial Managed Non-PoE Switches
Shopping Basket
PDT-PEX-7205-MP-SF-I
£199.95 £239.94 inc VAT (UK Only)

Availability: 6 in stock (can be backordered)

Scroll to Top