FNIRSI LPM-10A
FNIRSI LPM-10A – Multifunctional Network Cable Tracker
The FNIRSI LPM-10A is a multifunctional network/cable tester and cable tracer intended primarily for Ethernet and telephone-cabling installation, testing and fault-finding.
Features
- 2.4-inch colour TFT display with adjustable backlight.
- Network cable tracing using normal tracing mode.
- Anti-interference cable tracing for use where electrical noise makes cable identification difficult.
- RJ45 cable testing including wiremap and continuity.
- Cable fault detection, including open, short and crossover/wiring errors.
- Cable length measurement.
- RJ45 crimping/connection test to identify incorrect pin connections.
- Network port flashing to identify which switch/router port a cable is connected to.
- Network speed testing supporting 10/100/1000 Mbps Ethernet and full-/half-duplex testing.
- PoE detection, including PoE power mode/protocol and voltage information.
- NCV (non-contact voltage) detection for detecting the presence of AC voltage without making electrical contact.
- Built-in flashlight for working in dark cabinets, ceiling spaces and other confined areas.
- Adjustable cable-tracing sensitivity.
- Type-C charging.
- Compact handheld construction designed for field work.
Specifications:
| Specification | FNIRSI LPM-10A |
|---|---|
| Display | 2.4-inch colour screen |
| Backlight | Adjustable |
| Cable interface | RJ45 |
| Cable types | Network/Ethernet and telephone wiring |
| Network speeds | 10M / 100M / 1000M |
| Network test | Full duplex / Half duplex |
| Cable length test | Up to 100 m |
| Length accuracy | ±3.2 m at 100 m |
| Cable tracing | Normal + anti-interference |
| Wiremap | Yes |
| Continuity test | Yes |
| Open/short/crossover detection | Yes |
| RJ45 crimp test | Yes |
| Port flashing | Yes |
| PoE detection | Yes |
| NCV detection | Yes |
| Flashlight | Built in |
| Charging | USB Type-C |
| Charging input | 5 V / 1 A |
| Battery | 1500 mAh rechargeable lithium battery |
| Languages | English / Chinese |
| Dimensions | Approximately 152 × 68 × 31 mm |
| Operating environment | -5 to 40 °C |
| Maximum relative humidity | 80% RH |
Applications:
- Ethernet/network installation — checking newly installed Cat5e/Cat6-type network cabling.
- Network fault finding — identifying incorrect wiring, opens, shorts and crossover connections.
- Cable identification — tracing an individual cable through bundles of network or telephone cables.
- Anti-interference tracing — locating cables in electrically noisy environments.
- Network cabinet work — identifying which switch/router port corresponds to a particular cable using port flashing.
- PoE troubleshooting — checking whether a network connection provides PoE and examining its power/protocol information.
- Cable length estimation — determining the approximate length of an installed cable.
- RJ45 termination checking — checking whether plugs have been correctly crimped.
- Network performance checks — testing Ethernet link speed and duplex operation.
- Electrical safety checks — using NCV to identify potentially live wiring before working around cables.
- Telecom/telephone wiring — tracing and testing suitable RJ11/telephone cabling.
- Maintenance and service work — useful for IT technicians, network installers, electricians and field engineers.
Battery Data:
- Type: Li Polymer
- Voltage: 3.7V
- Energy: 3000mAh / 11.1 Wh
- Battery Weight: 46.4g
- Battery Size: 58.44*40.12*9.63mm
- Li Content: 0.74g
