FNIRSI DPOX180H

FNIRSI DPOX180H

FNIRSI Digital Handheld Oscilloscope – 180MHz -3dB 500ms/s – Dual Channel – 20MHz Signal Generator

If you need a cost-effective feature-packed handheld dual-channel digital oscilloscope/ signal generator, then the DPOX180H is definitely a good place to start. With its innovative digital phosphor display it packs a punch that much more expensive devices cannot deliver.

Digital phosphor technology is the benchmark for modern high-quality oscilloscopes, but often comes at a price point that rules out many users at an entry level. This technology can overcome noise representation of traditional oscilloscopes, but furthermore, it allows for better representation of the incoming signals.

The device’s analogue bandwidth is an impressive 180MHz @-3dB and it features a 500MS/s sampling rate. The unit features grey-scale and colour temperature display options via a 2.8″ IPS high-definition display screen. There are multiple trigger options including automatic and manual settings, with rising-edge and falling-edge triggering options.  A clean display signal is achieved using adjustable trigger suppression for high frequency, low frequency signals.

The high capacity 3000mAh rechargeable lithium battery gives up to 4 hours in battery only operation, and an on-board timer allows for auto-shutdown time to be configured from 5 mins to 2 hours, and the unit incorporates a fast-charging cycle.

The analogue front-end is protected and can withstand up to a 400V input voltage, preventing damage to the unit.

Built in 120Mb memory storage space allows for the capture of up to 250 groups of waveforms and up to 90 screenshots, to allow waveform data to be viewed at a later date.

USB connectivity is available on the unit to allow for image export, and the device firmware can be upgraded by the user if and when required.

Battery Data:

• Type: Li Ion
• Voltage: 3.7V
• Energy: 3000mAh / 11.1 Wh
• Battery Weight: 48.8g
• Battery Size: 61*40*10mm